Inertial Labs IMU-P Industrial A MEMS IMU

Manufacturer: | Categories: ,

The IMU-P Industrial A from Inertial Labs is a professional inertial measurement unit (IMU) that contains 3 ultra-high performance MEMS accelerometers and 3 highly accurate advanced MEMS gyroscopes.

REQUEST PRICING

Overview

The IMU-P Industrial A MEMS IMUfrom Inertial Labs is a compact, self-contained strapdown, industrial grade IMU and digital tilt sensor (DTS) that measures linear accelerations, angular rates, pitch & roll with three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. Angular rates and accelerations get accurately determined for both motionless and dynamic applications.

The IMU Industrial A is fully calibrated, temperature compensated, and mathematically aligned to an orthogonal coordinate system. This IMU demonstrates less than 1 °/hr gyroscopes and 0.005 mg accelerometers bias in-run stability with very low noise and high reliability.

Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements make the Inertial Labs IMU-P Industrial A easy to use in a wide range of higher-order integrated system applications.

The Inertial Labs IMU-P models can get aiding data from an external source of GNSS and then output a full spectrum of INS data (Positions, Attitude, Velocity, and Time).

Applications

  • Antenna and line of sight stabilization systems
  • Passenger trains acceleration/deceleration and jerking systems
  • Motion reference units (MRU)
  • Motion control sensors (MCS)
  • Gimbals, EOC/IR, platforms orientation and stabilization
  • GPS-Aided inertial navigation systems (INS)
  • Attitude and heading reference systems (AHRS)
  • Land vehicles navigation and motion analysis
  • Buoy or racing boat motion monitoring
  • UAV & AUV/ROV navigation and control

Technical Specifications

Gyroscopes
Range: ±450 °/sec, ±950 °/sec, ±2000 °/sec
Bias In-Run Stability: 3 °/hr (Allan Variance, RMS)
Noise – Angular Random Walk: 0.3 °/√hr
Accelerometers
Range: ±8 g, ±15 g, ±40 g, ±90 g
Bias In-Run Stability: 0.01 mg, 0.03 mg, 0.05 mg, 1 mg (RMS, Allan Variance)
Noise – Angular Random Walk: 0.02 m/sec/√hr, 0.045 m/sec/√hr, 0.06 m/sec/√hr, 15 m/sec/√hr
SF Accuracy: 500 ppm, 700 ppm, 850 ppm, 2,000 ppm (over temp. range)
Pitch & Roll
Pitch & Roll Static Accuracy: 0.05 ° (RMS)
Pitch & Roll Dynamic Accuracy: 0.08 ° (RMS)
Physical
Size: 39 mm x 45 mm x 22 mm
Weight: 70 g
Supply Voltage: 5 – 30 VDC
Power Consumption: 0.8 W @ 5V
Environmental
Mechanical Shock: 40g, 0.011 sec half-sine pulse
Vibration: 7 g, 20 – 2000 Hz
Operating Temperature: -40 °C to +85 °C
Storage Temperature: -50 °C to +90 °C

Warranty

Inertial Labs products are covered under their 15-month standard warranty. Inertial Labs will repair or replace products with design or manufacturing defects, for a period of 15 months from the date of purchase.

Why Buy from Us?

In business since 2004, Canal Geomatics is an authorized dealer for Inertial Labs and has established itself as an industry-leading distributor of high-precision positioning products in North America. Our mission is to find the best solution for each unique application and extend premium support to ensure the long-term success of our customers. We offer both volume and reseller discounts for the majority of our product lines.

Ordering

The IMU-P Industrial A from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.

You may also like…