PCTEL GNSS-HR26PM GNSS Fleet Tracking Antenna
The PCTEL GNSS-HR26PM GNSS fleet tracking antenna features an electrically shielded LNA PCB assembly and ceramic filter that are designed to provide proprietary high out-of-band rejection for optimal integration in congested wireless installations. Its low-profile radome is molded from high grade polymer resin for maximum UV and abrasion resistance under severe environmental conditions.
Description
Overview
The PCTEL GNSS-HR26PM GNSS fleet tracking antenna features a light, low-profile housing that is ideal for fleet management applications. Its radome is molded from high grade polymer resin for maximum UV and abrasion resistance under severe environmental conditions. Its electrically shielded LNA PCB assembly and ceramic filter are designed to provide proprietary high out-of-band rejection for optimal integration in congested wireless installations.
Features
- High performance – 26 dB gain; GPS L1 & GLONASS L1 Frequencies
- Superior out-of-band rejection for all GNSS frequencies – Via proprietary filtering design
- Rugged – Radome molded from high grade polymer resin for maximum UV and abrasion resistance; IP56 ingress protection
- Ease of installation – High bond tape for vehicle windshield glass installation
- Minimal visibility – Due to low-profile housing
- Enhanced safety – ESD protection
Applications
- Fleet management
Technical Specifications
| Signal Tracking | |
| GPS: | L1 |
| GLONASS: | L1 |
| Electrical | |
| Frequency Band: | 1565-1610 MHz |
| LNA Gain: | @ 3.0VDC: 26dB (typical) |
| Element Gain: | -2 dBic @ 20° |
| Polarization: | Right Hand Circular |
| Out of Band Rejection: | f0 = 1586 MHz f0 +/- 50MHz : ≥ 60dBc f0 +/- 60MHz : ≥ 70dBc |
| VSWR: | 2.0:1 maximum |
| Current Draw: | < 25 mA (typical) |
| DC Voltage: | 2.8-6.0 V (operating) ≤ 12.0 V (survivability) |
| Noise Figure: | < 2.0 dB (typical) |
| Nominal Impedance: | 50 ohms |
| Mechanical | |
| Dimensions: | 2.5 in OD x 0.5 in D (63.5 mm x 12.7 mm) |
| Weight: | 25 grams |
| Connector: | SMA Plug |
| Mount: | 1/2-inch built-in threaded stud mount for 1-inch diameter mounting holes. For up to 1/4-inch (6mm) surfaces. |
| Housing Material: | Black, UV-Stable ASA |
| Environmental | |
| Temperature Range: | -40 °C to +85°C (operating) |
| Humidity: | 95% |
| Mechanical Shock: | 25 g maximum |
| Fluid Shower: | Water, salt mist, windshield wiper fluid, detergent with wax: no degradation |
Ordering
The GNSS-HR26PM GNSS fleet tracking antenna from PCTEL is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.
