NV08C-RTK-M Dual Frequency GNSS/RTK Receiver Board
The NV08C-RTK-M GNSS/RTK receiver board from NVS Technologies is a fully integrated dual-frequency multi-constellation satellite navigation receiver with embedded RTK functionality. This receiver provides improved dual frequency RTK positioning to ensure centimeter-level accuracy over longer baselines. The NV08C-RTK-M GNSS receiver is specifically designed for use in high accuracy applications, demanding low cost, low power consumption, small form factor and uncompromised performance.
Description
Overview
The NV08C-RTK-M GNSS/RTK receiver board from NVS Technologies is a fully integrated dual-frequency multi-constellation satellite navigation receiver with embedded RTK functionality. This receiver provides improved dual frequency RTK positioning to ensure centimeter-level accuracy over longer baselines. The NV08C-RTK-M receiver is specifically designed for use in high accuracy applications, demanding low cost, low power consumption, small form factor and uncompromised performance.
Evaluation Kit NV08C-EVK-RTK-M is a set of instruments for a developer of systems based on NV08C-RTK-M module. Use of NV08C-EVK-RTK-M is a convenient way to learn functionality of NV08C-RTK-M and start the system design quickly.
Features
- L1 & L2 GPS, GLONASS, BeiDou
- Up to 30 km Base line support
- Base and Rover mode
- On-board multipath mitigation
- Improved Dual Frequency RTK Engine
- Fast RTK acquisition and reacquisition
- Centimeter-level positioning in RTK mode
- 3-stage filtration for high out-of-band interference immunity
- Advanced Delta-Phase-Filter for pass-to-pass applications
- Low power consumption
- Simple quick integration
- NMEA 0183, RTCM 3.1 communication protocols
- Industrial operating temperature range ‐40°C to +85°C
- Integrated MEMS-sensors (INS)
Applications
- Construction, Mining & Industrial
- Environmental & Structural Monitoring
- Machine control & automation
- Parallel Driving Systems
- Precision Agriculture
- Unmanned Aerial Vehicle (UAV)
- Robotics & Intelligent Machines
- Land Surveying, 3D Cartography, Air Photography
Technical Specifications
| GNSS Signals | |
| Number of channels: | 96 |
| Satellite Access Mode: | All-in-view |
| GPS: | L1, L2 |
| GLONASS: | L1, L2 |
| Galileo: | L1 |
| BeiDou: | B1, B2 |
| SBAS: | L1 |
| Navigation Features | |
| Accuracy (2D rms): | Autonomous mode 2.5 m SBAS <1 m RTK mode 1 cm + 1ppm |
| Velocity Measuring Precision: | 0.05 m/s (RMS) |
| Sensitivity: | Tracking and re-acquisition –160 dBm Acquisition –143 dBm RTK mode –137 dBm |
| Sensitivity: | Tracking and re-acquisition –160 dBm Acquisition –143 dBm RTK mode –137 dBm |
| Coordinate Systems: | WGS-84 |
| Time to First Fix: | Cold start < 40 s Warm start < 35 s RTK initialization time (after 3D fix) < 10 s Initialization reliability 99.9% |
| RF Functionality | |
| LNA: | Built-In (SW controlled for power saving) |
| RF Structure: | Two RF FE chains GALILEO/SBAS L1 + GPS/GLONASS/BeiDou L1 & L2 |
| Antenna Type: | Active |
| Environmental | |
| Operating Temperature: | -40 °C to +85 °C |
| Maximum Operating Humidity: | 98% @ 40°С |
| Data Interface | |
| PVT Output Rate: | 1, 2, 5, 10 Hz |
| Max Data Output Rate: | 20 Hz (with INS) |
| Supported Protocols: | NMEA 0183 RTCM 3.0, 3.1 |
| Host Data Interfaces: | 2x UART (3.3V CMOS-level) 1х USB 3.3V (D+, D-) |
| Data Connector: | PLD-20 male |
| Antenna Connector: | MCX female |
| Data Exchange Rate: | Up to 460’800 bits/s |
| Power Supply | |
| Power Supply Voltage: | 3.3V – 5.0V |
| Power Consumption: | GNSS RTK-navigation L1 – 400 mW (typical) GNSS RTK-navigation L1 & L2 600 mW (typical) |
| Physical | |
| Size: | 71 mm (L) х 46 mm (W) х 8.1 mm (H) |
| Weight: | 18 g (without package) |
Ordering
The NV08C-RTK-M dual frequency GNSS/RTK receiver board from NVS Technologies is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.
