NV08C-RTK-A GNSS/RTK Receiver Board with Heading
The NV08C-RTK-A GNSS/RTK receiver board with heading from NVS Technologies is a high-performing, multi-constellation satellite navigation receiver that allows for centimeter level positioning thanks to its RTK embedded functionality. Furthermore, it is fully compatible with GPS, SBAS, and GLONASS signals as well as GALILEO and BeiDou systems.
Description
Overview
The NV08C-RTK-A GNSS/RTK receiver board with heading from NVS Technologies is a fully integrated multi-constellation satellite navigation receiver with embedded RTK functionality. The NV08C-RTK-A’s key feature is its full compatibility with GPS, GLONASS and future GNSS constellations including Galileo and BeiDou. This receiver is specifically designed for use in high accuracy applications, demanding low cost, low power consumption, small form factor and uncompromised performance.
Evaluation Kit NV08C-EVK-RTK-A is a set of instruments for a developer of systems based on NV08C-RTK-A module. Use of NV08C-EVK-RTK-A is a convenient way to learn functionality of NV08C-RTK-A and start the system design quickly.
Features
- Integrated RTK functionality
- L1 GPS, GLONASS and SBAS
- Data rate up to 20 Hz
- Base and Rover mode
- RTK Positioning, Heading + Pitch/Roll
- Centimeter-level positioning in RTK mode
- Individual GLONASS group delay calibration
- 3-stage filtration for high out-of-band interference immunity
- Enhanced RAIM for 3D and RTK modes
- Low power consumption
- Simple quick integration
- NMEA 0183, RTCM 3.1 communication protocols
- Industrial operating temperature range ‐40°C to +85°C
- Integrated MEMS-sensors (INS)
Applications
- Construction, Mining & Industrial
- Environmental & Structural Monitoring
- Machine Control & Automation
- Parallel Driving Systems
- Precision Agriculture
- Unmanned Aerial Vehicle (UAV)
- Robotics & Intelligent Machines
- Land Surveying, 3D Cartography, Air Photography
Technical Specifications
| GNSS Signals | |
| Number of Channels: | 32 x 2 |
| Satellite Access Mode: | All-in-view |
| GPS/GALILEO/SBAS: | L1 |
| GLONASS: | L1 |
| Navigation Features | |
| Accuracy (2D rms): | Autonomous mode 2.5 m SBAS <1 m RTK mode 1 cm + 1ppm |
| Heading: | 0.1 deg @ 2m (RMS) |
| Velocity Measuring Precision: | 0.05 m/s (RMS) |
| Sensitivity: | Tracking and re-acquisition –160 dBm Acquisition –143 dBm RTK mode –137 dBm |
| Sensitivity: | Tracking and re-acquisition –160 dBm Acquisition –143 dBm RTK mode –137 dBm |
| Coordinate Systems: | WGS-84 |
| Time to First Fix: | Cold start < 40 s Warm start < 35 s RTK initialization time (after 3D fix) < 10 s Initialization reliability 99.9% |
| RF Functionality | |
| LNA: | Built-In (SW controlled for power saving) |
| RF Structure: | Two RF FE chains GPS/GALILEO/BeiDou/SBAS L1 + GLONASS L1 |
| Antenna Type: | Active |
| Environmental | |
| Operating Temperature: | -40 °C to +85 °C |
| Maximum Operating Humidity: | 98% @ 40°С |
| Data Interface | |
| PVT Output Rate: | 1, 2, 5, 10 Hz |
| Max Data Output Rate: | 20 Hz (with INS) |
| Supported Protocols: | NMEA 0183 RTCM 3.0, 3.1 |
| Host Data Interfaces: | 2x UART (3.3V CMOS-level) 1х USB 3.3V (D+, D-) |
| Data Connector: | PLD-20 male |
| Antenna Connector: | MCX female |
| Data Exchange Rate: | Up to 460’800 bits/s |
| Power Supply | |
| Power Supply Voltage: | 3.3V – 5.0V |
| Power Consumption: | GNSS RTK-Navigation – 300 mW (typical) GNSS RTK-navigation & Heading – 480 mW (typical) |
| Physical | |
| Size: | 71 mm (L) х 46 mm (W) х 8.1 mm (H) |
| Weight: | 21 g (without package) |
Video
Ordering
The NV08C-RTK-A GNSS/RTK receiver board with heading from NVS Technologies can be ordered through Canal Geomatics. For more information, please contact us using the Request Pricing form.