Inertial Labs TAA-315EC High-Precision 3-Axis MEMS Accelerometer
The TAA-315EC 3-axis accelerometer from Inertial Labs is a fully integrated inertial sensor that combines the latest MEMS sensor technologies and can measure accelerations in ±15g measurement range (±8g and ±40g versions also available).
Description
Overview
The TAA-315EC 3-axis accelerometer is part of the series of third-generation MEMS accelerometers from Inertial Labs, now released in a stand-alone design. These products are revolutionary, compact, self-contained, strapdown, navigation-grade accelerometers that measure linear accelerations with high precision due to their unique design. When measured by any of the TAA series of accelerometers, accelerations are determined with low noise and very good repeatability for both motionless and dynamic applications.
Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the TAA series of MEMS accelerometer’s Bias in-run stability is up to 0.005 mg at ±8g dynamic range with very low noise and high reliability.
Continuous Built-in Test (BIT), configurable communications protocols and flexible input power requirements make the TAA series of MEMS accelerometers easy to use in a wide range of higher order integrated system applications.
Applications
- Autonomous vehicles
- Antenna and LOS pointing systems
- Passenger trains acceleration/deceleration, and jerking systems
- Motion reference units (MRU) and motion control sensors (MCS)
- Gimbals, EOC/IR, platforms orientation and stabilization
- GPS-aided inertial navigation systems (INS)
- Attitude and heading reference systems (AHRS)
- Guidance and navigation
- UAV & AUV/ROV navigation and control
Technical Specifications
Parameters | |
Output Signals: | Three-axis Accelerations, Temperature, Synch |
Color of Enclosure: | Gold |
Update Rate: | 2000 Hz |
Output Data Rate: | 2000 Hz |
Start-up Time: | <0.2 sec |
Full Accuracy Data (Warm-up Time): | <1 sec |
Latency: | <1 milli sec |
Performance | |
Measurement Range: | ±15 g |
Bandwidth (-3dB): | 260 Hz |
Data Update Rate: | 2000 Hz |
Bias In-run Stability (Allan Variance): | 0.005 mg |
Bias Residual Error (in temp. range, RMS): | 0.3 mg |
Bias One-year Repeatability: | 0.45 mg |
SF Accuracy (over temperature range): | 100 ppm |
SF One-year Repeatability: | 400 ppm |
Noise. Velocity Random Walk (VRW): | 0.02 m/sec/√hr |
Non-Linearity: | 100 ppm |
Axis Misalignment (STD): | 0.2 mrad |
Environmental | |
Mechanical Shock: | 400 g, 0.1 ms |
Vibration: | 8 g RMS, 10 – 2000 Hz |
Operating Temperature: | -40°C to +85°C |
Storage Temperature: | -50°C to +90°C |
Low Pressure: | 1750 Pa, 30 min |
Humidity: | up to 95% |
MTBF (GM @+65degC, operational): | 100,000 hours |
Life Time (operational): | 10 years |
Life Time (storage): | 17 years |
Electrical | |
Supply Voltage: | 4.8 – 36 V DC |
Power Consumption: | 0.3 Watts |
Output Interface: | RS-422 + discrete IOs |
Output Data Format: | Binary, ASCII, KERNEL |
Physical | |
Size: | 28.5 x 19.5 x 13.6 mm |
Weight: | 13 grams |
Warranty
Inertial Labs products are covered under their 15-month standard warranty. Inertial Labs will repair or replace products with design or manufacturing defects, for a period of 15 months from the date of purchase.
Why Buy from Us?
In business since 2004, Canal Geomatics is an authorized dealer for Inertial Labs and has established itself as an industry-leading distributor of high-precision positioning products in North America. Our mission is to find the best solution for each unique application and extend premium support to ensure the long-term success of our customers. We offer both volume and reseller discounts for the majority of our product lines.
Ordering
The TAA-315EC 3-axis accelerometer from Inertial Labs is available through Canal Geomatics. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.